Omron E5*D Series Connection Manual page 29

12
Select Reset Controller from
the Controller Menu.
*"Reset Controller" cannot be
selected when the operating
mode of Controller is RUN
Mode. In this case, select
Mode - PROGRAM Mode from
the Controller Menu to change
to PROGRAM mode, and then
perform this step.
13
A confirmation dialog box is
displayed. Check the contents
and click Yes.
14
A confirmation dialog box is
displayed. Check the contents
and click Yes.
15
The Controller is reset, and
Sysmac Studio goes offline.
The yellow line under the toolbar
disappears.
7．Serial Communications Connection Procedure
26