Omron E5*D Series Connection Manual page 26

5
The Communications Setup
Dialog Box is displayed.
Select Direct connection via
USB in the Connection type
Field.
Click OK.
6
Select Online from the
Controller Menu.
The dialog box on the right is
displayed, check the contents
and click Yes.
*The contents of the dialog box
vary depending on the status of
Controller. Check the contents
and click on an appropriate
button to proceed with the
processing.
7
When an online connection is
established, a yellow line is
displayed under the toolbar.
Additional Information
For details on the online connections to the Controller, refer to Section 6. Online Connections
to a Controller of the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
8
Select Synchronize from the
Controller Menu.
7．Serial Communications Connection Procedure
23