Omron E5*D Series Connection Manual page 16

9
"len" (Communications Data
Length) is displayed.
Check that Communications
Data Length is 7 bits.
*If the setting value is different,
change it in the same way as
step 6.
Press the M (Mode) Key.
10
"sbit" (Communications Stop
Bits) is displayed.
Check that Communications
Stop Bits is 2 bits.
*If the setting value is different,
change it in the same way as
step 6.
Press the M (Mode) Key.
11
"prty" (Communications Parity)
is displayed.
Check that Communications
Parity is EVEN.
*If the setting value is different,
change it in the same way as
step 6.
Press the M (Mode) Key.
12
"sdwt" (Send Data Wait Time) is
displayed.
Check that Send Data Wait Time
is 20.
*If the setting value is different,
change it in the same way as
step 6.
Press the L (Level) Key for less
than 1 second.
7．Serial Communications Connection Procedure
<Setting value>
7 or 8 bits (default: 7)
M (Mode) Key
<Setting value>
1 or 2 bits (default: 2)
M (Mode) Key
<Setting value>
NONE, EVEN or ODD
(default: EVEN)
M (Mode) Key
<Setting value>
0 to 99 ms (default: 20)
L (Level) Key.
13