Omron E5*D Series Connection Manual page 31

7
The 0 [Unit 0] : CJ1W-SCU42
(J01) Tab Page is displayed.
Click Transfer to Controller.
8
A confirmation dialog box is
displayed. Check the contents
and click Yes.
A dialog box is displayed
indicating that transferring is
being performed. After that, the
dialog box on the right is
displayed. Check the contents
and click Yes.
9
The Port Selection Dialog Box is
displayed.
Select All ports and click OK.
10
A confirmation dialog box is
displayed. Check the contents
and click OK.
7．Serial Communications Connection Procedure
28