7.3.2.
Starting Sysmac Studio and Importing the Project File
Start Sysmac Studio and import the project file.
Install Sysmac Studio and the USB driver on your personal computer beforehand.
1
Start Sysmac Studio.
*If the User Account Control
Dialog Box is displayed at start,
make a selection to start
Sysmac Studio.
2
Click Import.
3
The Import file Dialog Box is
displayed.
Select P520_NJ_CWF485_
OMRON_E5CD_V100.csm2
and click Open.
*Obtain the project file from
OMRON.
7.Serial Communications Connection Procedure
17