Omron E5*D Series Connection Manual page 27

9
The Synchronization Dialog Box
is displayed.
Check that the data to transfer
(NJ501 shown on the right) is
selected.
Click Transfer To Controller.
*After executing "Transfer To
Controller", the Sysmac Studio
data is transferred to
Controller, and the data is
synchronized.
10
A confirmation dialog box is
displayed. Confirm that there is
no problem, and click Yes.
A screen is displayed stating
"Synchronizing".
A confirmation dialog box is
displayed. Confirm that there is
no problem, and click No.
*Do not return to RUN mode.
7．Serial Communications Connection Procedure
24