B01-Machine Number - ISHIDA Uni-3 Technical Manual

3.2

B01-Machine Number

Specify stand alone, master or satellite operation. Configure
Ethernet and WiFi communication settings.
Parameter Display
B01-01 B01-01-01 Machine Set
Basic
B01-01-02 Communication
B01-01-03 PLU Reference
B01-01-04 Machine Number
B01-01-05 Network Number
B01-01-06 Master Port Number
B01-01-07 Satellite Port Number Satellite machine port number. Specify the port number
B01-01-08 Master IP Address
B01-01-09 PLU Sync
B01-02 B01-02-01 IP Address
IP Addr
B01-02-02 Subnet Mask
B01-02-03 Default Gateway
B01-02-04 MAC Address
B01-02-08 DHCP
B01-02-09 Hostname
B01-02-10 DHCP ID Option
B01-02-11 Update Address
B01-03-08 PING to PC
Description
Specify scale configuration
Execute online setup. Satellite only. If there is a line
malfunction, place communication temporarily offline to
operate independently without a transmission
connection to the master.
Specify if PLUs are called from the Master scale or the
satellite scale's memory. Satellite only.
Machine Number
Network Number
Master machine port number. Specify the port number
for socket transmission.
for socket transmission.
Enter IP address of master scale.
Specify the master machine when connecting to CSIS
satellite. Execute PING to test connection to
master scale.
Synchronization switch for product master's satellite. If
YES, it will automatically send to the satellite when the
product master is updated by the master machine.
Enter the IP address of the scale. Enter the full 12-digit
number including leading zeros. Do not enter decimal
points.
Enter the subnet mask of the scale. Enter the full
12-digit number including leading zeros. Do not enter
decimal points.
Enter the gateway address of the scale. Enter the full
12-digit number including leading zeros. Do not enter
decimal points.
View the CPU board's MAC Address.
Notes:
1. Enter 495344, PLU to enable this step.
2. Use for MAC Address filtering wireless security.
Enables the automatic assignment of the IP address,
subnet and gateway address from a DHCP server.
Specifies a hostname (Option 12) to allow the DHCP
server to identify the Uni-3 scale (optional).
Specifies the Client-Identifier (Option 61) which is added
in the DHCP Discover message.
Press the Zero key to request an IP address, subnet
and gateway address from the DHCP server.
Press the Zero key to execute the PING in order to test
the connection to the PC.
A long beep = success.
Five short beeps = failure.
Table 3-1. B01 Machine Number Parameters
BO1 MACHINE No.
1: Alone
2: Master
3: Satellite
1: Offline
2: Online
1: Local Scale
2: Master Scale
1-99
--
55101
55102
--
1: Yes
2: No
***.***.***.***
***.***.***.***
***.***.***.***
00:30:16:**:**:.**
1: No
2: Yes
--
1: None
2: H-Name
3: 0+H-Name
--
--
Setup Mode
(COMMS)
Choices
33