B01-Machine Number; B02-Sales Mode - ISHIDA Astra II Bench Operation Manuals

2.1

B01-Machine Number

Configure Ethernet communication settings.
Parameter Display
B01-02 B01-02-01
IP ADDR
B01-02-02 Subnet Mask
B01-03-08 PING TO PC
B01-03 B01-03-01
PC COM
B01-03-02 PORT NO
B01-03-03 COM CHK
B01-03-04 TIME OUT
B01-03-05 FTP USER
B01-03-06 FTP PASS
B01-03-08 PING TO PC
2.2

B02-Sales Mode

Parameter Display
B02-01 B02-01 SALES MODE
SALES MODE
Description
Enter the IP address of the scale. Enter the full 12-digit number
including leading zeros. Do not enter decimal points.
Enter the subnet mask of the scale. Enter the full 12-digit number
including leading zeros. Do not enter decimal points.
Zero
Press the key to execute the PING in order to test the
connection to the PC.
A long beep = success.
Five short beeps = failure.
Enter the target address when executing a PING. Enter the full
12-digit number including leading zeros. Do not enter decimal
points.
PC port number used for communication. Do not change.
COM check time (seconds). 600 Recommended.
COM check time out (seconds). Do not change.
Enter user name for FTP transmission. Press
character string edit.
Enter password (more than 8 characters) for FTP transmission.
Edit
Press and enter character string - number and letters, no
special characters.
Zero
Press the key to execute the PING in order to test the
connection to the PC.
A long beep = success.
Five short beeps = failure.
Table 2-1. B01 Machine Number Parameters
Description
Fixed at 1.
Table 2-2. B02 Sales Mode Parameters
© Rice Lake Weighing Systems ● All Rights Reserved
Edit
and enter
Choices
1: NO OPERATOR
Print
Issue labels using the key.
Setup Mode
Choices
***.***.***.***
***.***.***.***
--
***.***.***.***
8071
30-9999 (0)
2
--
--
--
9