ISHIDA Uni-3 Technical Manual page 12

Note
Key Type is available only when options 2-9 are selected in step 7.
9. Enter a number
1-3
10. Press the
Down Arrow
11. Press . Enter wireless network name. This is case sensitive.
Edit
12. Press twice.
Enter
Note
Steps 13-14 are available only when Key type is set as WEP. If Key Type is not set to WEP, skip to step 15.
13. Press four times.
Enter
14. Enter a number
1-4
Note
The Encryption Key name in step B01-04-05 varies based on the Security Type selected in step 7.
15. Press . Enter the encryption key (case sensitive).
Edit
16. Press twice.
Enter
17. Press .
Mode 14038-0009 WI-FI SET UP
18. Press .
Enter 14038-0010 WI-FI SET UP
19. Press .
Enter B01-04 WI-FI
20. Press .
Mode 14034-0000 REBOOTING CHECK
21. Press .
Enter 15029-0001 REBOOT CHECK
22. Power off the scale. Wait 10 seconds before proceeding.
23. Power on the scale. After rebooting,
24. Press .
Enter KEY IN ITEM No.
25. Confirm communication. Scale is ready to resume weighing and labeling.
8 Uni-3 Technical Manual
to set the key type, then press
Number
1
2
3
Table 3. Encryption Key Types
. is displayed.
B01-04-03 SSID
is displayed.
B01-04 WI-FI
B01-04-04 WEP KEY IND
to set the WEP key index, then press
Number
1
2
3
4
Table 4. WEP Key Index Parameters
is displayed.
B01-04 WI-FI
is displayed. Wait 5 seconds before proceeding.
is displayed. Wait 5 seconds before proceeding.
is displayed. Wait 5 seconds before proceeding.
is displayed. Wait 5 seconds before proceeding.
PLEASE CONFIRM TIME
will display
.
Enter B01-04-02 Key Type
Encryption Key Type
Hex
ASCII
Passphrase
is displayed.
.
Enter B01-04-05 ENCRYPTION KEY
WEP Key Index
Key1
Key2
Key3
Key4
is displayed. Wait 5 seconds before proceeding.
will display.
is displayed.
is displayed.