Chapter 5 Machine Disassembly; Bench Type; Upper Case - ISHIDA UNI-5 Service Manual

MACHINE DISASSEMBLY
5.1

BENCH TYPE

5.1.1 UPPER CASE

Hold up the front side of the weigh platter
1.
and pull to remove the platter.
Raise the operation panel and remove the
3.
screw fixing the hinge cover.
Remove the five screws (blue), two tapping
5.
screws (red), and one TP screw (green).
Upper case
* Reverse this procedure for assembly.
UNI-5 Service Manual

Chapter 5 MACHINE DISASSEMBLY

Remove the lock.
2.
Make the operation panel angle about 45
4.
and pull out the hinge cover.
Remove the upper case.
6.
Weigh platter holder
5
5-1