Table of Contents
Advertisement
D
OCUMENT
This installation guide provides a product overview of and installation instructions for the Medium Power
Carrier Access Point (CAP M), which allows transmission between Era equipment, antennas, and Ethernet
devices (such as WiFi and IP cameras).
Table 1 lists the CAP M models that this installation guide supports.
For information on other Era system components, refer to the Era™ software and hardware user
documentation, which can be accessed on the CommScope DCCS Customer Portal (see
User Documentation" on page
For information on how to find the minimum software requirements for Era hardware, refer to
"Hardware to Software Mapping Information" on page
Document Revision History
This is the second release of the Medium Power Carrier Access Point Installation Guide, which:
adds support for the new Era system configuration and WCS Subrack functions and modes that were
•
introduced in Era Software Version 2.5; for an overview see "Era System Overview" on page 4
updates Figure 1 on page 5, which shows an Era system in which the CAP Ms connect to a Classic CAN
•
updates "Recommended Tools and Material" on page 15
•
updates "General Mounting Cautions" on page 23
•
updates "Mount a CAP M Using a Single Mounting Bracket" on page 25 and "Mount Two CAP Ms Using a
•
Dual Mounting Bracket" on page 31—the M6x12 screw now requires an M6 plain washer and an M6
split-lock washer
adds "Pole Mounting Kit for Up to 18" Poles" on page 8 and "Mount the CAP M to a 4" to 18" Pole" on
•
page 39.
M0201AJB
© October 2018 CommScope, Inc.
O
VERVIEW
Table 1. Supported CAP M Models
1
Part Number
Model Name
7781125-000x
CAP M 9/18/21/26
7820478-000x
CAP M 7E/80-85/17E/19
1
The "-000x" suffix provides information as to whether the C A P M is AC or DC.
Contact your local sales representative for further information. See also
"CommScope Part Numbers" on page
55.)
3.
54.
™
Era
Medium Power Carrier Access Point Installation Guide
"Accessing Era
Page 1
Hide quick links:
Advertisement
Table of Contents
