Document Overview; Document Revision History - CommScope ION E Series Installation Manual

D O
OCUMENT
This installation guide provides a product overview and installation instructions for the ION-E Series Low
Power Carrier Access Point (CAP L), which allows transmission between ION-E equipment, antennas, and
Ethernet devices (such as WiFi and IP cameras).
Table 1 lists the CAP L models that this installation guide supports.
For further information on ION-E system components, refer to the ION-E Series WCS-2, WCS-4, and e-POI
Subracks and Power Supply Unit Installation Guide and the ION-E Series Universal Access Point Installation
Guide (see "Accessing ION-E Series User Documentation" on page
For information on how to find the minimum software requirements for ION-E hardware, refer to
"Hardware to Software Mapping Information" on page

Document Revision History

This is the third release of the ION
Document Number M0201AAC, dated January 2018, which
adds
•
support for the CAP L 17E/19/23/25TDD
–
"Required Distances Between CAP Ls and Antennas" on page 16
–
updates
•
the required clearance between a CAP L and an antenna in "General Installation Safety Requirements"
–
on page 12
"Antenna Stmt for ISED:" and "Antenne Stmt pour ISDE:" on page 14.
–
M0201AAC
© April 2018 CommScope, Inc.
VERVIEW
Table 1. Supported CAP L Models
1
Part Number Model Name
7770203-000x CAP L 17E/17E /23/23
7770209-000x CAP L 18/21/26/26
7770356-000x CAP L 17E/17E /19/19
7776596 -000x CAP L 7/80-85/17E/19
7776597-000x CAP L 17E/19/ 23/25TDD
1 The "-000x" suffix provides information as to whether the C AP L has a Fiber or
Copper interface, and the power and Fan Kit options. Contact your local sales
representative for further information.
® -E Series Low Power Carrier Access Point Installation Guide, CommScope
53.)
52.
ION®-E Series Low Power Carrier Access Point Installation Guide
Page 1