Notch-Filter Connectors
The CAP M 7E/80-85/17E/19 has two Notch-Filter connectors that are reserved for future use. The
connectors, which are closed by a jumper, have a protective cover. Do not remove the protective cover or
interfere with the jumper.
CAP M Hardware Options
The following sections describe hardware options for the CAP M.
Single Mounting Bracket
The Single Mounting Bracket (CommScope PN 7821954-xx) provides the mounting brackets required to
mount an CAP M to a wall or other vertical, flat surface. See "Mount a CAP M Using a Single Mounting Bracket"
on page 25.
M0201AJB
© October 2018 CommScope, Inc.
Figure 3. Notch-Filter Connector on the CAP M 7E/80-85/17E/19
Protec ve cover over the
Notch-Filter connectors
Notch-Filter connectors
closed with a jumper
™
Era
Medium Power Carrier Access Point Installation Guide
CAP M Overview
Page 7