CommScope Era CAP M 9 Installation Manual page 49

Remove the six neck screws (shown below) from the front cover of the Splice Box.
3
Open the Splice Box.
4
Attach an M4 x 25 pan-head screw to the upper hole, and a
5
second M4 x 25 pan-head to the hole on the lower, left-hand side
(shown at right) of the Splice Box.
Close the Splice Box.
6
Replace the six neck screws that you removed from the front
7
cover of the Splice Box in Step 3 on page 45.
Go to "Grounding the CAP M" on page 46.
8
M0201AJB
© October 2018 CommScope, Inc.
™
Era Medium Power Carrier Access Point Installation Guide
Installing CAP Ms
Page 45