CommScope Era CAP M 9 Installation Manual page 47

Remove the six neck screws (shown below) from the front cover of the Splice Box.
2
Open the Splice Box.
3
Attach an M4 x 25 pan-head screw to the upper hole, and a second M4 x 25 pan-head to the hole on the
4
lower, right-hand side of the Splice Box.
Close the Splice Box.
5
Replace the six neck screws that you removed from the front cover of the Splice Box in Step 2 on page 43.
6
Go to "Grounding the CAP M" on page 46.
7
M0201AJB
© October 2018 CommScope, Inc.
™
Era Medium Power Carrier Access Point Installation Guide
Installing CAP Ms
Page 43