CommScope Era CAP M 9 Installation Manual page 37

From both sides of CAP M-1:
7
Loosen the M6 pins, leaving its washer in place.
a
Remove the two M6 screws and their M6 plain and M6 split-lock washers; reserve the screws and
b
washers as you will later reinstall them.
M0201AJB
© October 2018 CommScope, Inc.
Loosen the M6 pin
Remove the M6x12 screw and its washers
M6 plain washer
M6 split-lock washer
M6x12 screw
™
Era Medium Power Carrier Access Point Installation Guide
Installing CAP Ms
Page 33