Safely Working With Era Hardware; Rf Safety Cautions; Health And Safety Precautions; Property Damage Warnings - CommScope Era CAP M 9 Installation Manual

Medium power carrier access point

Hide thumbs

Table Of Contents

Table of Contents

AFELY

ORKING WITH

The following sections provide important information that you should read and know before working with

any Era hardware. Observe all cautions and warnings listed in this section.

RF Safety Cautions

This system is a RF Transmitter and continuously emits RF energy. Maintain a minimum 8-inch (20 cm)

clearance from the antenna while the system is operating. Whenever possible, shut down the RAN before

servicing the antenna.

Only license holders for the respective frequency range are allowed to operate this unit.

Health and Safety Precautions

A high leakage current ground (earth) connection to the Power Supply Unit (PSU) is essential before

making any other connections to the PSU.

Laser radiation. Risk of eye injury in operation. Do not stare into the laser beam; do not view the laser

beam directly or with optical instruments.

High frequency radiation in operation. Risk of health hazards associated with radiation from the

antenna(s) connected to the unit. Implement prevention measures to avoid the possibility of close

proximity to the antenna(s) while in operation.

Property Damage Warnings

Keep operating instructions within easy reach and make them available to all users.

Only license holders for the respective frequency range are allowed to operate this unit.

Read and obey all the warning labels attached to the unit. Make sure that all warning labels are kept in a

legible condition. Replace any missing or damaged labels.

Make sure the unit's settings are correct for the intended use (refer to the manufacturer product

information) and regulatory requirements are met. Do not carry out any modifications or fit any spare

parts, which are not sold or recommended by the manufacturer.

Due to power dissipation, the CAP M may reach a very high temperature. Do not operate this equipment

on or close to flammable materials. Use caution when servicing the CAP M.

M0201AJB

ARDWARE

Era