CommScope Era CAP M 9 Installation Manual page 30

Installing CAP Ms
Secure the Mounting Bracket to the wall
6
(or other suitable vertical surface)
shown to the right.
Install the mounting bracket using 4
a
M6 screw anchors (not included) or
suitable lag bolts according to the
drilling layout.
The M6 screw anchors do not ship
with the CAP M as the anchor type is
dependent on the on-site conditions
(wall structure and materials). Use
screw anchors that are rated for the
mounting surface.
Confirm that the Mounting Bracket
b
is securely fastened to the wall.
™
Era Medium Power Carrier Access Point Installation Guide
Page 26
Single Moun ng Bracket
1
4
© October 2018 CommScope, Inc.
2
3
1 4
through
are the four screw anchors
M0201AJB