Attach A Hybrid Fiber Splice Box To The Cap M; Attaching A Hybrid Fiber Splice Box For A Single Mount Installation - CommScope Era CAP M 9 Installation Manual

Installing CAP Ms

Attach a Hybrid Fiber Splice Box to the CAP M

The steps in this section pertain only to those installations that require the use of the optional Hybrid
Fiber Splice Box to provide fiber and power to the CAP M. If the optional Hybrid Fiber Splice Box is not
required for this installation, skip to
Follow the procedure that is appropriate for this installation:
"Attaching a Hybrid Fiber Splice Box for a Single Mount Installation" on page 42
•
"Attaching a Hybrid Fiber Splice Box for a Dual Mount Installation" on page 44.
•

Attaching a Hybrid Fiber Splice Box for a Single Mount Installation

Hang the Splice Box onto the Single Mounting Bracket on the right-hand side of the CAP M, as shown
1
below.
™
Era Medium Power Carrier Access Point Installation Guide
Page 42
"Grounding the CAP M" on page 46.
Single
Moun ng
Bracket
Hybrid Fiber
Splice Box
© October 2018 CommScope, Inc.
M0201AJB