Wall Mount a CAP M2 Using a CAP M2 Hybrid Fiber Splice Box Kit (optional)
The steps in this section pertain only to those installations that require the use of the optional Hybrid
Fiber Splice Box to provide fiber and power to the CAP M2.
Remove the Hybrid Fiber Box cover.
Attach the Hybrid Fiber Splice Box to the Wall Bracket with the three captive screws already installed in
1
the Splice Box.
2
Replace the cover.
3
Attach the assembled Wall Mounting Bracket and Hybrid Splice Box to the selected mounting location.
If required, install an SFP+ module and follow the instructions in
4
on page
34.
5
Follow procedure in
6
M0203AHA_uc
© August 2022 CommScope, Inc.
"Mounting CAP M2 with a Wall Mounting Kit" on page
Mount the Fiber CAP M2
"Installing SFP+ Modules in the CAP M2"
19.
CommScope ERA
®
CAP M2 with Fiber Interface
Page 27