Jungheinrich DFG 320 Operating Instructions Manual page 73

Depositing a load
– Drive the truck carefully up to the rack.
– Set the travel direction switch (28) to
neutral.
– Raise the forks to the correct height for
the rack space.
– Set the travel direction switch (28) to
forward. Carefully enter the load into
the rack space.
– Slowly lower the load until the forks
are free.
– Set the mast vertical.
M
Avoid placing the load down suddenly to
avoid damaging the load and the load
handler.
Handling individually suspended loads
Travel at max. crawl speed when transporting suspended loads. For operations
involving suspended loads, the safety of the truck must be individually assessed by a
specialist." The capacity is reduced by at least 1/3.
E 32
28