Jungheinrich DFG 320 Operating Instructions Manual page 58

F
After starting the engine, carry
out a test run and check the
following functions:
– Test the parking brake (16)
and the slow travel /brake
pedal (29+21).
– Test the engine speed with
the accelerator pedal (22)
over a range of speeds
while checking the freedom
of movement of the pedal.
– Test the operation of the
raise/lower (26), tilt (25) and
if applicable the attachment
hydraulic control functions.
– Turn
wheel (17) as far as it will
go in both directions and
test the steering.
M
Do not run up the engine in
idle. The engine soon reaches
operating temperature at a
moderate charge and when
the speed alternates.
Only fully charge the engine
when the
temperature
shows operating temperature.
The truck
operation
functional controls have been
satisfactorily performed and
operating
reached.
the steering
engine coolant
display (10)
is ready for
once all the
temperature is
26
25
17
10
22
E 17