Jungheinrich DFG 320 Operating Instructions Manual page 71

Lifting loads
F
Do not lift other people with the lifting
device.
– Carefully approach the load to be
lifted.
– Set the travel direction switch (28) to
neutral.
– Raise the forks to the correct height for
the load.
– Set the mast vertical.
– Set the travel direction switch to
forward travel.
F
At least two thirds of their length must
extend into the load.
– Drive the truck with forks spread as far
apart as possible underneath the load.
– Set the travel direction switch (28) to neutral.
– Raise the fork carriage until the load rests freely on the forks.
– Set the travel direction switch to reverse.
– Make sure you have enough space to reverse into.
– Reverse carefully and slowly until the load is outside the storage area.
F
Do not allow
underneath a raised load.
E 30
anyone to stand
28