Jungheinrich DFG 320 Operating Instructions Manual page 67

Auxiliary hydraulics ZH3
Use button (1) to toggle control lever (23) from ZH2 to ZH3.
To activate ZH3, press button (1) when the
control lever is in the neutral position and
apply the lever. When the button is
depressed, ZH3 is permanently activated. If
the button is released after moving the
control lever out of its neutral position, ZH3
will only remain activated until the control
lever is restored to the neutral position. To
toggle back from ZH2 to ZH3 press the
button again.
E 26