Jungheinrich DFG 320 Operating Instructions Manual page 47

t
Travel direction switch
Z
When the travel direction switch (28) is
in the central position, the transmission
is in idle.
– To select the forward gear, push
the switch forward.
– To select the reverse gear, push
the switch back.
Z
The engine will not start if a travel
direction is pre-selected.
o
Aisle selector (option) attached
to steering column
The standard aisle selector at-
tached to the right of the driver's
seat can optionally be replaced by
an aisle selector attached to the
steering column (30).
Z
When the aisle selector (30) is in the
centre position, the transmission is
in idle.
– To select forward gear, push the
lever forward.
– To select reverse gear, push the
lever back.
Z
The engine will not start if a travel direction is pre-selected.
Neutral Interlock
If the truck is abandoned without taking it out of gear, the truck is automatically set to
neutral. This is shown by the neutral indicator in the dashboard. When travel is
resumed (by sitting on the truck), the travel direction switch must be set to neutral (N).
Travel can now resume.
E 6
28
30