Jungheinrich DFG 320 Operating Instructions Manual page 68

Operating the integrated sideshift (ISS)
The integrated sideshift allows the fork carriage to be moved to the side.Sideshift left
(as seen by driver):
– Push the control lever (24) forward.
Sideshift right (as seen by driver):
– Pull the control lever (24) back.
Integrated fork positioner
The integrated fork positioner allows the distance between the forks to be set.
Pushing the lever (23) forward opens the forks, pulling the lever back closes them.
If the forks are no longer even, the fork positioner can be re-synchronised. To do this,
open the forks as far as the stop and close them again.
Other Attachments
Always follow the manufacturer's operating instructions when using other
attachments.
The control levers of the attachments are indicated by symbols to show the function
of the attachment.
M
Attention: Only use attachments that have CE approval. The reduced residual
capacity must be re-calculated and indicated by a separate capacity plate.
F
Note reduced capacity for extending (see Chapter B).
E 27