Built-In Potentiometer; Terminal 12 Extended Function; Terminal C1 Extended Function; Timer Operation - FujiFilm FVR-Micro Instruction Manual

E60
Built-in Potentiometer (Function selection)
E61
Terminal [12] Extended Function
E62
Terminal [C1] Extended Function
E60 through E62 define the property of the built-in potentiometer and terminals [12] and [C1],
respectively.
There is no need to set up the potentiometer and terminals if they are to be used for frequency
command sources.
Data for E60,
E61, or E62
0
1
2
3
5
If the built-in potentiometer and different terminals have been set up to have the
same data, the operation priority is given in the following order:
Selecting the UP/DOWN control (F01, C30 = 7) ignores auxiliary frequency
command 1 and 2.
C21

Timer Operation

C21 enables or disables a timer operation that is triggered by a run command and continues for
the timer count previously specified with the
operation is given below.
Data for C21
0
1
• Pressing the
• Even if C21 = 1, setting the timer to 0 no longer starts the timer operation with the
• Applying terminal command FWD or REV instead of the key command can also
start the timer operation.
Function
None
Auxiliary frequency
command 1
Auxiliary frequency
command 2
PID command 1
PID feedback amount
E60 > E61 > E62
key during timer countdown quits the timer operation.
key.
This is an auxiliary analog frequency input to be added to
frequency command 1 (F01). It is never added to
frequency command 2, multistep frequency command or
other frequency commands.
This is an auxiliary analog frequency input to be added to
all frequency commands including frequency command
1, frequency command 2 and multistep frequency
commands.
This input includes temperature, pressure or other
commands to apply under the PID control.
Function code J02 should be also configured.
This input includes the feedback of the temperature or
pressure under the PID control. (Not available for E60.)
/ keys. The operating procedure for the timer
Function
Disable timer operation
Enable timer operation
5-56
Description
--