Table of Contents
Advertisement
CHAPTER 3 Settings and Measurement
(2) SPAN/TRACE/POSITION
3-18
Switch to change the information on the digital display.
Use to change the settings related to waveform display during Free Running,
data capture and data replay.
Pressing the key will switch displays as follows:
Y-T screen
MONITOR
Displays digital values
(default status)
Use [CH SELECT] key or
Change the contents of the selected CH with
* When set at ALL, setting values for CH1 is reflected on other channels.
When CH1 is OFF, setting for ALL is disabled.
* When Logic CH is selected, use
Logic.
XY screen
MONITOR
Displays the digital
value . (Default
status)
· L-R key mode
Use [CH SELECT] key or
Use
keys to change the contents of the selected XY-CH and axis.
· Cross key mode
Use [CH SELECT] key to move XY-CH.
Use the
keys to change the contents of the X-axis, and use
change the contents of the Y-axis.
(In the Quick setting area, use
SPAN
POSITION
Allows changing of the
Allows changing of the
span value
position
keys to move the CH.
keys to select individual CH for
RANGE/SPAN
POSITION
Allows changing of the
Allows changing of the
range/span value
position (center
(waveform
position of waveform) .
amplitude) .
keys to move XY-CH and axis.
keys to change the contents.)
TRACE
Allows turning ON/
OFF of the waveform
display
* Data is captured even
if OFF is set .
keys.
VERNIER
Allows changing of the
vernier (fine
adjustment of
waveform amplitude) .
keys to
Advertisement
Table of Contents
