Table of Contents
Advertisement
Setting
Stop Source
[Off]
[Level value]
[Alarm]
[External input]
[Specified
time]
Specified time
setting
[Specified day
of the week]
Specified day
of the week
setting
[Constant time]
Specified period of time setting
Pre-trigger mode
Pre-trigger data points
Repeat
Repeat interval mode
Repeat int.
Alarm
Mode
Settings
Level
Output
Alarm Hold
Output 1
Set the type of start trigger.
Off, Level, Alarm, External input, Specified time, Specified day of the week, Constant time
Set to Off when not using trigger.
Combination
Set the trigger signal detecting method and combination for each CH.
Level OR, Level AND, Edge OR, Edge AND
Mode
Set the level of trigger mode.
Analog: Off, H (Rising), L (Falling), Window In, Window Out
Logic: Off, H, L
Pulse: Off, H (Rising), L (Falling), Window In, Window Out
* The value in the parentheses is displayed when the Combination is set to
Edge.
Level
Set the trigger level value. Set by numerical value.
Alarm port
Set the alarm output port number that generates the trigger.
number
1, 2, 3, 4
Set it when inputting the trigger signal from the outside.
Time setting
Set the unit for repeating the trigger time.
range
Absolute time, Year, Month, Day, Hour, Minute
Date
Set the trigger date.
Jan. 1, 2000 – Dec. 31, 2035
* Settable item varies depending on time setting range setting.
Time
Set the trigger time.
0 hour 0 minute 0 second to 23 hour 59 minute 59 second
* Settable item varies depending on time setting range setting.
Day of the week
Set the day of the week when the trigger is generated.
Set to On or Off for Sunday to Saturday individually.
Time
Set the trigger time.
0 hour 0 minute 0 second to 23 hour 59 minute 59 second
Set the time length of the trigger.
0 hour 0 minute 1 second to 9999 hour 59 minute 59 second
Set the pre-trigger operation mode.
Prioritize trigger, Prioritize pre-trigger capture
* You can set the mode only when the capturing destination is internal RAM.
Set the number of data points for pre-trigger capture.
0 to Number of capturing points of internal RAM data
* You can set the capturing points only when the capturing destination is
internal RAM.
Set the repeat capturing.
Off, On
Set the repeat interval mode.
Start - Start, Stop - Start
Set the repeat interval.
0 hour 0 minute 0 second to 9999 hour 59 minute 59 second
Set the alarm level mode.
Analog: Off, H, L, Window In, Window Out
Logic: Off, H, L
Pulse: Off, H, L, Window In, Window Out
Set the alarm level value.
Set by numerical value.
Set the alarm output CH when an alarm occurs.
1 to 4
Set whether to hold the alarm occurrence status.
On, Off
Set the output contents of the alarm output terminal 1.
Alarm output 1, Trigger output
CHAPTER 3 Settings and Measurement
Selections available
3-95
Advertisement
Table of Contents
