Firmware Version; Operating Modes; Overview Of Operating Modes - Siemens 6DR50 Series Operating Instructions Manual

Operating

6.2 Operating modes

Function of buttons:
● The
● The
this button to move the actuator in "Manual" mode.
● The
use this button to move the actuator in "Manual" mode.
Note
Order
Parameters are activated in the reverse order when the
simultaneously.
6.1.3

Firmware version

The current firmware version is displayed when you exit the operating mode "Configuration".
Figure 6-2
6.2 Operating modes
6.2.1

Overview of operating modes

You have five operating modes at your disposal to operate the positioner:
1. P-manual mode (as-delivered condition)
2. Configuration and initialization mode
3. Manual mode (MAN)
4. Automatic (AUT)
5. Diagnostics
106
button is used to select the modes and to forward the parameters.
button is used to select parameter values in "Configuration" mode. You can use
button is also used to select parameter values in "Configuration" mode. You can
Firmware version, e.g. Version 5.00.00
and buttons are pressed
SIPART PS2 with and without HART
Operating Instructions, 09/2014, A5E00074631-12