UVITEC Cambridge FIREREADER MAX User & Service Manual page 153

You can apply a specific wavelength value to monochrome images by selecting the Wavelength
option:
You can define custom palettes using the Add a point option:
Click on Add a point to add a color on the pseudo colors list. Select the color from the Add a point
palette:
For the bicolor selection, click on the arrow to define the value of the color you want to modify.
While keeping the mouse button pressed, move the arrow to its new value. Release the mouse
button when value is satisfactory, the image is automatically updated. You can repeat these
operations as many times as necessary for all pseudo colors.
If needed, select the point to remove and click on Remove point to remove a color from the
pseudo colors list.
User defined palette design
You can also save and load your own palette design. Define the set of colors you want to apply
and click on Save to save the palette design. Click on Load to open your palette design.
UVITEC – Cambridge
153/225