Installing The Firereader; Unpacking The System - UVITEC Cambridge FIREREADER MAX User & Service Manual

Unpacking the system

Please, open the F
Darkroom / Camera and camera support
Power cable
Instruction manual
FireReader 1D software CD-Rom inside the instruction manual
USB cable for Auto version only (motorised zoom)
Remove carefully each component from the box.
Remove their protective plastic cover.
Place the darkroom at its permanent location, the door facing forward. The cabinet has to be placed
near the computer used for image acquisition.
It is recommended that the F
– one on each side- holding the instrument from the bottom side. Be sure that the
door is properly closed when carrying the instrument.
Do not connect the power cable to a power source until all connections are made.
The power source has to be grounded and protected by a circuit breaker.
The FireReader system is designed to fit a specific voltage. Please, check the
voltage to ensure it corresponds to the FireReader specifications.
UVITEC – Cambridge
15/225
FIREREADER FIREREADER FIREREADER FIREREADER
I
N S T A L L I N G T H E
R box carefully and verify the contents:
IRE EADER
SERIES SERIES SERIES SERIES
F R
I R E E A D E R
R darkroom be carried by at least two people
IRE EADER
1
1
1
1
1