Changing Or Deleting The Password Range - Eaton easy500, easy700 Operating Instructions Manual

5 settings
5.1 Password protection
ENTER PASSW
XXXX
PROGRAM...
STOP
PARAMETER
INFO

5.1.5 Changing or deleting the password range

CHANGE PW
ACTIVATE PW
ENTER PASSW
XXXX
ENTER PASSW
1789
ENTER PASSW
0000
5.1.5.1 Delete
166
easy will display the password entry field.
▶ Set the password using the cursor buttons:
▶ Confirm with OK.
If the password is correct, easy will switch automatically to the Status
display.
The PROGRAM... menu option is now accessible so that you can edit your
circuit diagram.
The System menu is also accessible.
▶ Unlock easy.
▶ Press DEL and ALT to call up the System menu.
▶ Open the password menu via the menu option SECURITY →
PASSWORD...
The CHANGE PW entry flashes.
easy will only show this menu if a password is present.
▶ Press OK to enter the password entry menu.
▶ Press OK to move to the 4-digit entry field.
▶ Four zeros will be displayed
▶ Modify the four password digits using the cursor buttons.
▶ Confirm with OK.
Press ESC to exit the security area.
Use number combination 0000 to delete a password.
If a password has not been entered already, easy will show four XXXX.
Operating instructions 05/10 MN05013003Z-EN www.eaton.com