Table of Contents
Advertisement
INVALID PROG
6.8.2 Soft help
If there are transmission problems, easy will display the INVALID PROG
message.
▶ Check whether the circuit diagram is suitable for the destination device.
￫
If the operating voltage fails during communication with the PC,
repeat the last step. It is possible that not all the data was
transferred between the PC and easy.
Figure 101: Removing the
▶ After transmission, remove the cable and close the interface.
easySoft is provided with an extensive Online Help.
▶ Start easySoft-Basic or easySoft-Pro and click the ? menu item in order to
open the Help.
The help provides all the additional information about easySoft that you will
need.
Operating instructions 05/10 MN05013003Z-EN www.eaton.com
EASY-PC-CAB
6 Internal
6.8 Soft
201
Advertisement
Table of Contents
