Eaton easy500, easy700 Operating Instructions Manual page 60

3 Placing into operation
3.4 Creating your first circuit diagram
êê êê êêê
↑
êê l êêê
← →
↓
I1-I2l
êê êê êê êêê
êê êê êê êêê
êê êê êê êêê
I1-I2----ÄQ1
I1-I2----ÄQ1
SAVE
CANCEL
56
The wiring arrow works between contacts and relays. When you move the
arrow onto a contact or relay coil, it changes back to the cursor and can be
reactivated if required.
￫
easy automatically wires adjacent contacts in a rung up to the
coil.
▶ Press ALT to wire the cursor from
The cursor changes into a flashing wiring arrow and automatically jumps to
the next logical wiring position.
▶ Press the cursor button
field.
￫
You can use DEL to erase a connection at the cursor or arrow
position. Where connections intersect, the vertical connections
are deleted first, then, if you press DEL again, the horizontal
connections are deleted.
▶ Press the cursor button
The cursor will move to the coil field.
▶ Press OK.
easy will insert relay coil
are correct and do not have to be changed.
Q1
Your first working easy circuit diagram now looks like this:
Press ESC to leave the circuit diagram display.
The adjacent menu will appear.
▶ Press OK.
The circuit diagram is now automatically saved. CANCEL exits the circuit
diagram. Changes that have been made to the circuit diagram are not saved.
￫
easy saves all the necessary circuit diagram and program data
retentively in the internal data memory.
Once you have connected pushbutton actuators S1 and S2, you can test your
circuit diagram straight away.
Operating instructions 05/10 MN05013003Z-EN www.eaton.com
through to the coil field.
I2
í
. Contact will be connected up to the coil
I2
í
once more.
. The specified coil function
Q1
Ä
and the output relay