Table of Contents
Advertisement
T3 Ü
S
I1
02,030
I2
05,000
T:
5.3.1 Adjustable parameters for function relays
5.3.1.1 Example: Changing switch times for outdoor lighting
Ö1 A 15:21 +
D
MO-FR
ON
19:00
OFF
23:30
Ö1 B 15:21 +
D
--
ON
00:00
OFF
00:00
Ö1 B 15:21 +
D
SA
ON
00:00
OFF
00:00
▶ Select the required function block with
+
▶ Press the OK button.
▶ Use the cursor buttons
▶ Change the values for a parameter set:
•
Press OK to enter the Entry mode,
ú í
•
Press
ÍÚ
•
Press
•
Press OK to save constants or
•
ESC Retain previous setting.
Press ESC to leave the parameter display.
You can also modify the function relay parameters used in the circuit diagram
in the PARAMETER menu.
Adjustable setpoint values are:
•
With all function relays the setpoints
•
On and off times with time switches.
In RUN mode easy operates with a new setpoint as soon as it has been
modified in the parameter display and saved with OK.
The outdoor lighting of a building is automatically switched on from 19:00 to
23:30 Mondays to Fridays in the easy circuit diagram.
The parameter set for the time switch function relay 1 is saved in channel A
and looks like this.
From the following weekend, the outdoor lighting is now also required to
switch on between 19:00 and 22:00 on Saturdays.
▶ Select PARAMETER from the main menu.
The first parameter set is displayed.
▶ Use Í or Ú to scroll through the parameter sets until channel A of time
switch 1 is displayed.
▶ Press Í to select the next empty parameter set, in this case channel B of
time switch 1.
The current time is 15:21.
▶ Change the value for the day interval from MO to SA:
ú í
•
Move between the parameters
ÍÚ Change value.
•
▶ Press OK to acknowledge the value SA.
Operating instructions 05/10 MN05013003Z-EN www.eaton.com
Í
Ú
or
to scroll through the parameters.
to change decimal place,
to change the value of a decimal place,
5 settings
5.3 Alter parameters
Í
Ú
or
.
169
Advertisement
Table of Contents
