Ethernet Ioc Statistics (Cnas Only) - Brocade Communications Systems CNA 1010 Troubleshooting Manual

3
Statistics
<port_ID>
Displaying statistics through HCM
To display the Ethernet Statistics dialog box, use the following steps.
1. Select an Ethernet port from the device tree.
2. Select Monitor > Statistics > Eth Statistics from the main menu.

Ethernet IOC statistics (CNAs only)

Use HCM options and BCU to display statistics relevant to the Ethernet IO controller (IOC). A variety
of statistics display, such as the following:
•
•
•
•
•
•
•
You can also select options to keep running data, set the polling frequency, start polling data, and
reset statistics.
Displaying statistics through HCM
To display Ethernet IOC statistics use the following steps.
1. Select an Ethernet port from the device tree.
2. Select Monitor > Statistics > Eth IOC Statistics from the main menu.
64
The ID of the Ethernet port. This could be the PWWN, port hardware path, or
user-specified port name. This could also be the adapter-index/port-index.
For example, to specify adapter 1, port 1 you would use 1/1 as the port
identification.
OR
Right-click the Ethernet port and select Statistics > Eth Statistics from the list.
The Ethernet Statistics dialog box at the host level displays.
Mailbox interrupts
Enable and disable events
Heartbeat failures
Firmware boots
Ethernet ICO statistic timeouts
Checksum help errors
VLAN transmit and receive transactions
OR
Right-click the Ethernet port and select Statistics > Eth IOC Statistics from the list.
The Eth IOC Statistics dialog box at the host level displays.
Brocade Adapters Troubleshooting Guide
53-1001582-01