Brocade Communications Systems CNA 1010 Troubleshooting Manual page 122

A
Adapter driver event messages
TABLE 13
Driver event messages (continued)
Message
Remote port (WWN = [remote port
WWN]) offlined by logical port (WWN
= [logical port WWN]).
Remote port (WWN = [remote port
WWN]) connectivity lost for logical
port (WWN = [logical port WWN]).
Target (WWN = [Target WWN]) is
online for initiator (WWN = [Initiator
WWN]).
Target (WWN = [Target WWN])
offlined by initiator (WWN = [Initiator
WWN]).
Target (WWN = [Target WWN])
connectivity lost for initiator (WWN =
[Initiator WWN]).
Virtual port deleted using proprietary
interface: WWN = [logical port WWN],
Role: [initiator, target, IPFC mode
etc.].
Virtual port deleted using standard
interface: WWN = [logical port WWN],
Role: [initiator, target, IPFC mode
etc.].
Virtual port login failed. Duplicate
WWN = [logical port WWN] reported
by fabric.
Virtual port (WWN = [logical port
WWN]) login failed. Max NPIV ports
already exist in fabric/fport.
Virtual port (WWN = %s) login failed.
Network and Storage Driver Events
Adapter removed: SN = [adapter
serial number].
Authentication successful for base
port: WWN = [base port WWN or
MAC].
102
Severity Event Type
Information Storage driver
Error Storage driver
Information Storage driver
Information Storage driver
Error Storage driver
Information Storage driver
Information Storage driver
Warning Storage driver
Warning Storage driver
Warning Storage driver
Warning Network and
storage driver
Information Network and
storage driver
Category Sub Cause
Category
4 (RPORT) Offline Login nexus with
remote port
terminated by
logical port.
4 (RPORT) Offline Login nexus with
remote port is lost.
5 (ITNIM) Online SCSI IT-Nexus
established
between initiator
and target.
5 (ITNIM) Offline SCSI IT-Nexus
terminated by
Initiator.
5 (ITNIM) Offline SCSI IT-Nexus
terminated between
initiator and target.
3 (LPORT) Deleted Virtual port deleted.
3 (LPORT) Deleted Virtual port deleted.
3 (LPORT) Failed Duplicate WWN
reported by fabric.
3 (LPORT) Failed Max NPIV ports
already exist in
fabric/fport.
3 (LPORT) Failed Unknown error.
1 Removed Adapter removed.
(Adapter)
2 (Port) Successful Authentication
successful.
Brocade Adapters Troubleshooting Guide
Action
No action
required.
Check if remote
port is having
issues.
No action
required.
No action
required.
No action
required.
No action
required.
No action
required.
Delete this vport
and create with a
different WWN.
Check fabric and
fport
configuration
Check
fabric/fport
configuration.
Check PCIe
connector and
configuration.
No action
required.
53-1001582-01