Determining Settings Through Hcm; Persistent Binding; Displaying Persistent Binding Settings Through Bcu; Displaying Persistent Binding Settings Through Hcm - Brocade Communications Systems CNA 1010 Troubleshooting Manual

Determining settings through HCM

Launch the Remote Port Properties panel in HCM as follows to display information on target rate
limiting and QoS for the remote port.
1. From the device tree, select a remote port (target or initiator).
2. Click the Remote Port Properties tab in the right pane.

Persistent binding

Persistent binding is a feature of adapters that enables you to permanently assign a system SCSI
target ID to a specific Fibre Channel (FC) device, even though the device's ID on the FC loop may be
different each time the FC loop initializes. Persistent binding is available in the Windows and
VMware environments only.
Use HCM features or BCU commands to display target ID mapping for an adapter port.

Displaying Persistent Binding settings through BCU

Use the pbind --list BCU command to query the list of mappings for persistent binding on a specific
port.
pbind --list <port_id> <pwwn>
where:
port_id
pwwn

Displaying Persistent Binding settings through HCM

Launch the Persistent Binding dialog box as follows to determine SCSI target ID mappings:
1. Launch the HCM.
2. Select an adapter or port from the device tree.
3. Select Configure > Persistent Binding.
Brocade Adapters Troubleshooting Guide
53-1001582-01
The Remote Port Properties panel displays.
ID of the port for which you want to query mappings.
Port World Wide Name
OR
Right-click on an adapter or port in the device tree and select Persistent Binding from the list.
The Persistent Binding dialog box at the host level displays with details about the persistent
binding configuration.

Persistent binding

3
91