Brocade Communications Systems CNA 1010 Troubleshooting Manual page 132

B
HCM and Installer Message Reference
TABLE 14
Message
Team name should start
with an alphabet.
Allowed characters are
0-9, A-Z, a-z, hyphen (-)
and underscore (_) and
should not exceed 31
characters.
Failed to refresh the
team data due to an
unexpected error.
<Runtime Reason>
Modify Team failed due
to an unexpected error.
<Runtime Reason>
Add Team failed. Given
adapter is part of
another Team or VLANS
exist.
Please assign at least
one port for a Team
Please select a Team
No Team for deleting
The team name is
duplicated. Please enter
a qualified Team Name.
You did not select any
virtual port. Select one or
more virtual ports.
The virtual port is a
duplicate. Enter a valid
WWN.
You are about to delete a
large number of virtual
port(s). Are you sure you
want to continue?
Failed to create virtual
port:
The virtual node WWN is
not valid. Enter a valid
Node WWN.
You have unsaved
configurations. Do you
want to save the
previous configurations?
112
Host Connectivity Manager messages (continued)
Cause
Occurs when the user provides an invalid team
name.
Occurs when an error occurs while refreshing
the team data.
Occurs when a runtime error happens while
modifying the team.
Occurs when the user tries to create a team
using an adapter for which are VLANs
configured.
Occurs when the user clicks on Apply or Ok
without selecting a port while creating or
editing a Team configuration.
Occurs when the user selects Statistics or
Delete without selecting a team.
Occurs when the user selects Delete when
there is no team configured.
Occurs when the user tries to add a team with
existing team name.
Occurs when the user selects Apply on the
Virtual Port Deletion dialog box without
selecting any virtual ports.
Occurs when the user enters a duplicate virtual
port WWN in the Virtual Port Creation dialog
box.
Occurs when user deletes virtual ports the
Virtual Port Deletion dialog box were
configured using HCM and BCU.
Occurs when there is a error while creating
virtual ports
Occurs when the user enters a invalid WWN in
the Virtual Port Creation dialog box.
Occurs when the user removes, adds, or edits
VLANS in the VLAN Configuration dialog box,
and then clicks Cancel.
Corrective Action or Notes
Make sure the team name starts
with a letter. Allowable characters in
the team name are 0-9, A-Z, a-z,
hyphen (-) and underscore (_).
Determine why the error happens,
and then proceed.
Determine why the error occurs.
Do not create team when VLANs are
configured.
Be sure to selected a port when
creating or editing a team.
Select at least one port while
creating or editing a team.
Information message.
Provide different name for the new
team.
Select the desired virtual ports, then
select Apply.
Provide a unique virtual port WWN.
Information message.
Determine why the error happens
when creating a virtual port.
Provide valid WWN.
Either select Yes to save the
unsaved configurations or No to not
save the unsaved configurations.
Brocade Adapters Troubleshooting Guide
53-1001582-01