Brocade Communications Systems CNA 1010 Troubleshooting Manual page 131

TABLE 14
Message
VLAN and Team
configurations
successfully restored.
Failed to restore the
VLAN and Team
configurations.
<Runtime Reason>
Cannot connect to the
server. Update failed.
This action resets all
listed counters. Do you
want to continue?
Cannot get Teaming
statistics for this host. No
Teaming configured.
All statistics data
displayed here will be
lost if you do not save
them. Do you want to
proceed?
Syslog configuration
failed
A maximum of three IP
addresses are allowed.
Add Team failed due to
an unexpected error.
<Runtime Reason>
Remove Team failed due
to an unexpected error.
<Runtime Reason>.
Member not found. Team
modification failed.
A maximum of eight
ports are allowed in a
team.
Add Team failed.
<Runtime Reason>
Brocade Adapters Troubleshooting Guide
53-1001582-01
Host Connectivity Manager messages (continued)
Cause
Occurs when the VLAN and Team
configurations are successfully restored in
HCM.
Occurs when the restore of VLAN and Team
configuration fails in HCM.
Occurs when the user attempts operation in
Basic Port Configuration, Advanced Port
Configuration, or a Reset operation in a
Statistics dialog box when the agent is not
running.
Occurs when the user selects Reset on a
Statistics dialog box.
Occurs when the user launches the Teaming
Statistics dialog box when there are no teams
configured in the host.
Occurs when the user closes the any Statistics
dialog box.
Occurs when the user tries to configure a
syslog server using the Syslog Server
Configuration dialog box.
Occurs when more than three IP addresses are
entered in the Syslog Server Configuration
dialog box.
Adding a team failed due to an unexpected
error.
An unexpected error occur ed while removing a
team.
Occurs when user modified a team while
another user removes the respective adapter.
Occurs when the user tries to create a team
with more than eight ports.
Occurs when addition of team failed due to
runtime error.
HCM and Installer Message Reference
Corrective Action or Notes
Information message.
Retry the operation.
Check if agent is still running
Select Yes to reset all the counter
values in the dialog box.
Error message. Teams must be
configured before using this dialog
box.
Information message.
Retry the operation.
Configure three or less IP
addresses.
Determine why the error happens
when adding a team.
Determine why the error happens
when removing a team.
Verify whether the adapter still
exists in the host.
Create a team with eight or fewer
ports.
•
Refer to the runtime reason.
•
Refer to HCM logs.
•
Verify if the team was already
added.
B
111