Brocade Communications Systems CNA 1010 Troubleshooting Manual page 128

B
HCM and Installer Message Reference
TABLE 14
Message
Choose any of the event
severity levels to filter.
Event Filter cannot be
launched while the Event
Properties dialog is
open.
Clear Filter cannot be
performed while the
Event Properties dialog is
open.
Invalid time range. Enter
a valid time range.
The CHAP Secret and
Retype Secret fields
must have at least 8
alphanumeric
characters.
Cannot find the adapter.
Try again later.
The WWN or MAC
address already exists in
the All WWNs/MACs
table. Edit the existing
record(s). Record(s) with
the same WWN address
are highlighted.
Duplicate File: <Export
File Name>. Do you want
to replace the file?
Name should start with
an alphabet. Allowed
characters are 0-9, A-Z,
a-z, hyphen (-) and
underscore (_) and
should not exceed 15
characters
The specified file is not a
valid file to import.
108
Host Connectivity Manager messages (continued)
Cause
Occurs when the user selects an event severity
level, and then clicks OK in the Master Log
Filter dialog box.
Occurs when the user tries to launch the
Master Log Filter dialog box while the Event
Properties dialog box is open.
Occurs if the Event Properties dialog is kept
open and the user clicks Clear Filter.
Occurs when the user enters an invalid time
range in the Masterlog Log Filter dialog box.
Occurs when the secret key provided in the
CHAP Secret and Retype CHAP Secret field is
less than eight alphanumeric characters.
Occurs when user enables or disables the
adapter in the following scenario.
1 HCM discovers the adapter and places it
into the product tree.
2 Another user removes the adapter before
the next discovery.
3 User now tries to enable/disable the
adapter.
Occurs when user enters a WWN or MAC
address which is already present the
WWN/MAC field in the Devine Names dialog
box.
Occurs when the user exports names to a file
that already exists.
Occurs when user provides a invalid name with
special characters other than hyphen and
underscore or name with more than 15
characters.
Occurs when invalid file is imported through
the Configure Names dialog box.
Corrective Action or Notes
Select at least one severity level
(such as major or minor), and then
click OK in the Master Log Filter
dialog box.
Close the Event Properties dialog
box, and then launch the Master Log
Filter dialog box.
Close the Event Properties dialog
box, and then click Clear Filter to
clear configured filters.
Enter a valid time range and collect
the events logged for that time.
Provide a proper secret key which
has at least 8 alpha numeric
characters.
Refresh the product tree and check
if the adapter is still available.
Check the same WWN or MAC
address is available in the
WWNs/MAC view of the Configure
Names dialog box. Enter a different
WWN or MAC address.
Try to export the names with a
different file name.
Enter a valid name which does not
include any special character, other
than hyphen and underscore, and is
not more than 15 characters.
Import a valid file with appropriate
data in the Configure Names dialog
box.
Brocade Adapters Troubleshooting Guide
53-1001582-01