Brocade Communications Systems CNA 1010 Troubleshooting Manual page 83

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Displaying statistics through BCU
Display Ethernet statistics using the following BCU command.
ethport --stats <port_id>
where:
Brocade Adapters Troubleshooting Guide
53-1001582-01
Transmitted multicast frames
Transmitted multicast VLANs
Transmitted broadcast octets
Transmitted broadcast frames
Transmitted broadcast VLANs
Transmitted errors
Transmitted VLAN filters
Transmitted filter MAC source addresses
Received unicast octets
Received unicast frames
Received unicast VLANs
Received multicast octets
Received multicast frames
Received multicast VLANs
Received broadcast octets
Received broadcast frames
Received broadcast VLANs
Received frame drops
Received packets
Transmitted packets
Received bytes
Transmitted bytes
Linux NetIf queue stops
Linux NetIf queue wakups
Linux TSO IPv4 packets
Linux TSO IPv6 packets
Linux errors
TCP checksum offloads
UDP checksum offloads
Checksum help requests
Checksum help errors
Hardware statistics updates
3
Statistics
63