3
Statistics
<port_id>
level
Adjusting the HCM logging level
Adjust logging levels for the following logs using HCM:
•
•
To adjust the logging level, use the following steps.
1. Select Configure > HCM Logging Levels.
2. Select a level on the Agent Communication Log and HCM Debug Log lists.
Statistics
You can access a variety of statistics using BCU commands and HCM. Use these statistics to
monitor adapter performance and traffic between the adapter and LUNs and isolate areas that
impact performance and device login.
You can display statistics for the following:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
60
ID of port for which you want to change the logging level. This could be the
PWWN, port hardware path, or user-specified port name. This could also be
the adapter-index/port-index. For example, to specify adapter 1, port 1 you
would use 1/1 as the port identification.
Critical | Error | Warning | Info
Specifies the severity level. Error is the default setting. If no level is specified,
the current log level displays.
Agent Communication Log, where all messages are exchanged between the HCM application
and the HCM Agent.
HCM Debug Log, where messages are logged locally.
Values are Trace, Debug, Info, Warning, Error, and Fatal.
Adapter ports
Authentication activities
CEE
Ethernet
Ethernet I/O controller
Fibre Channel over Ethernet (FCoE)
IO controller (IOC)
Virtual ports (vport)
Link Layer Discovery Protocol (LLDP)
Logical ports (lport)
Remote ports (rport)
Fibre Channel Protocol (FCP) initiator mode
Fabric
Targets
Teaming
Security authentication
Brocade Adapters Troubleshooting Guide
53-1001582-01