Troubleshooting; Led Status - Danfoss VLT Profinet MCA 120 Operating Instructions Manual

Troubleshooting

10 Troubleshooting

10.1 LED Status

Ethernet Port 1
MCA 120
MS LED
MS
PROFINET
NS LED's
NS1
MAC: 00:1B:08:XX:XX:XX
NS2
SW. ver. 3.00 (TM: 3:15)
Illustration 10.1 LED
Status
No IP Address assigned
No Communication to PROFINET module. Module is waiting for
configuration telegram from Controller.
IO AR established
Supervisor AR established, No IO AR.
Internal Error
Wink
Table 10.1 MS: Module Status
Network Status
Phases Status
Power Off No Power or No Link on the corresponding port
IP Address Conflict
Power On
Waiting for configuration
In Data Exchange Mode
Running
Wrong Configuration
No increment in "In Octets" counter of
Data exchange
corresponding port in last 60 s
Table 10.2 Indication on Network Status LED
MG90U302
Operating Instructions
Ethernet Port 2
Option A
130B1135
Host Name
8 7 6 5 4 3 2 1
Tri-colour LED
Off
Green:
Green:
Green:
Red:
Yellow:
Danfoss A/S © Rev. 2014-02-27 All rights reserved.
▂███▂███▂█
▂█▂█▂█▂█▂█
▂█▂█▂█▂█▂█
Tri-colour LED
Off
Red:
▂█▂█▂█▂█▂█
Green:
Green:
▂███▂███▂█
Red:
▂█▂█▂█▂█▂█
Yellow:
10 10
63