HEIDENHAIN TNC 426 PB/M Technical Manual page 253

MP Function and input
MP120.0-8 Assignment of speed encoder outputs to the axes
Input:
MP120.0-8 Assignment of speed encoder outputs to the axes
Input:
MP121 Nominal speed command output of the spindle(s)
MP121 Nominal speed command output of the spindle
Input:
MP121.0 Nominal speed command output of the first spindle
Input:
MP121.1 Nominal speed command output of the second spindle
Input:
MP210 Counting direction of position encoder output signals
Format:
Input:
December 2001
0: No servo-controlled axis
1 to 6: Analog output 1 to 6 at terminal X8
7 to 13: Analog output 7 to 13 at
terminal X9
51 to 59: Digital output X51 to X59
0: No servo-controlled axis
A1 to A6: Analog outputs 1 to 6
terminal X8
A 7 to A13: Analog outputs 7 to 13 at
terminal X9
D1 to D6: Digital axes 1 to 6
0: No servo-controlled axis
A1 to A6 or 1 to 6: Analog outputs 1 to 6 at
terminal X8
A7 to A13 or 7 to 13: Analog outputs 7 to 13
at terminal X9
S1: Digital spindles
0: No servo-controlled axis
1 to 6: Analog output 1 to 6 at terminal X8
7 to 13: Analog output 7 to 13 at
terminal X9
51 to 59, 61: Digital outputs X51 to X59, X61
0: No servo-controlled axis
1 to 6: Analog output 1 to 6 at terminal X8
7 to 13: Analog output 7 to 13 at
terminal X9
51 to 59: Digital output X51 to X59
%xxxxxxxxx
Bits 0 to 8 correspond to axes 1 to 9
0: Positive
1: Negative
List of Machine Parameters
Software Page
version and
behavior
280 474-01 6 – 16
RESET
RESET
6 – 18
RESET
280 474-01
RESET
280 474-01
RESET
RESET 6 – 10
4 – 15