What Is A Machine Parameter? - HEIDENHAIN TNC 426 PB/M Technical Manual

4 Machine Parameters

4.1 What is a Machine Parameter?

December 2001
A contouring control must have access to specific data (e.g., traverse
distances, acceleration) before it can execute its programmed instructions.
You define these data in machine parameters.
This list of machine parameters is divided into groups according to topic.
Machine parameters
10 to 999
1000 to 1399
1400 to 1699
1700 to 1999
2000 to 2999
3000 to 3999
4000 to 4999
5000 to 5999
6000 to 6199
6200 to 6299
6300 to 6399
6500 to 6599
7100 to 7199
7200 to 7349
7350 to 7399
7400 to 7599
7600 to 7699
If there is more than one input value for a single function (e.g., a separate input
for each axis), the parameter number is extended by indices. Index zero is
always axis 1, index one is axis 2, etc.
Example:
MP1010.0-8
MP1010.0
MP1010.1
MP1010.2
MP1010.3
MP1010.4
MP1010.5
MP1010.6
MP1010.7
MP1010.8
What is a Machine Parameter?
Topics
Encoders and machines
Positioning
Operation with Velocity Feedforward Control
Operation with Following Error (Servo Lag)
Integrated Speed and Current Control
Spindle
Integral PLC
Data Interface
3-D touch probe
Digitizing with triggering touch probe
Digitizing with measuring touch probe
Tool measurement with triggering touch probe
Tapping
Programming and display
Colors
Machining and Program Run
Hardware
Rapid traverse
Rapid traverse for axis 1
Rapid traverse for axis 2
Rapid traverse for axis 3
Rapid traverse for axis 4
Rapid traverse for axis 5
Rapid traverse for axis 6
Rapid traverse for axis 7
Rapid traverse for axis 8
Rapid traverse for axis 9
4 – 3