Single Scene Crossfading - ETC SmartFade User Manual

S i n g l e S c e n e C r o s s f a d i n g
When STACK is off and NEXT is on, SmartFade is set up to run like a single-scene
crossfading console. When Next is on the green channel bumps are lit with the levels to be
output to stage on the next Crossfade, when Next is Off the lights indicate the actual stage
levels. Next may be turned on and off to toggle between these two displays
NEXT
Action
1. Activate Next mode
2. Set intensities
3. Crossfade manually
To fade endlessly between Live and Next: hold PAUSE before reaching the end of a
crossfade - this will prevent the release of the intensity channels. Let go of PAUSE to
terminate the crossfade.
F a d e w i t h T i m e s
You can activate set the default Up/Down times with the wheel.
Press GO to execute a crossfade using these times.
5
Playback
Console
NEXT
or
1-24 25-48
1-48 49-96
Crossfaders
Feedback
The intensity faders no longer contribute to
the live output.
Set up any intensities manually with the inten-
sity faders. They will not be output.
Move the Crossfader pair from bottom to top.
As soon as both crossfaders reach the end of
the current fade, the intensity channels are
released from the Live fader for setting the
next look.
63