Edit Memories; Edit A Memory; Delete A Memory; Copy A Memory - ETC SmartFade User Manual

Edi t Memories
Every memory can be edited blind (fader at zero) or live (fader at full). It is possible to erase
all memories at once.
E d i t a m e m o r y
Action
1. Activate Edit mode
2. Select memory (change
page if necessary).
3. Edit intensities
4. End editing
D e l e t e a m e m o r y
To delete a single memory edit it so all intensities are at zero.
C o p y a M e m or y
Action
1. Activate Copy mode
2. Select source memory
(change page if neces-
sary).
3. Select target
44
See "Erase Functions" on page 23.
Console
EDIT
MEM
... or
1 24
...
1 48
Programming functions
EDIT
MEM
Console
COPY
... or
1 24
...
1 48
... or
1 24
...
1 48
Feedback
All buttons with content that can be edited will
blink at full (press CLEAR to exit).
The moment the bump button is pressed, this
memory is selected for editing. EDIT MEM
and CLEAR will blink.
Make any changes with all normal program-
ming functions for intensities.
on page 29. Intensities may have to be
matched by the faders before the level can be
changed.
As soon as EDIT MEM is pressed the
changes are stored. The console will auto-
matically return to it's previous fader mode. If
you press CLEAR instead, changes are
aborted.
Feedback
This button lights up. All buttons with content
will blink at full (press CLEAR to exit).
When this button is pressed, all possible tar-
gets for this copy operation will blink. Empty
ones blink at full, occupied ones are dimmed.
As soon as the button is pressed, the source
memory is recorded.
SmartFade v3.0.1 User Manual
See "Program"