Power-Up And Shutdown Procedures; Unpack & Connect; Power-Up Procedure; Shutdown Procedure - ETC SmartFade User Manual

Power-up and Shutdown Procedures

U n p a c k & C o n n e c t
You can get SmartFade up and running in no time.
• Unpack
• Connect power
• Connect DMX to dimmers
• Power up
P o w e r - u p P r o c e d u r e
SmartFade uses the power button for power-up and power-down. It is also used to access
the operating mode selection menu.
Action
Press and release
* During the startup process, LEDs will fade to full brightness regardless of user settings.
S h u t d o w n P r o c e d u r e
Action
1. Press and release
2a. Confirm
2b. Cancel
When you use the shutdown procedure, the SmartFade console will complete any pending
operations and save any system data as required to ensure error-free startup at the next
session. Disconnecting power from the console while it is shut down produces no ill effects.
4
Console
Console
<
Feedback
The LCD shows the current software version.
The button LEDs will light up in the following
order: GREEN, RED, then the rest. After this
all LEDs light to the levels appropriate to the
selected mode of operation. *
Feedback
The LCD shows a message asking that you
confirm the shutdown command.
Console is shut down.
Shutdown is cancelled and operation
resumed.
SmartFade v3.0.1 User Manual